TruGlo TC8360B

A: Jonathan. this is AR compatible. You will need a .5" Riser to get optimal height for your AR Rifle. -: https://www.budsgunshop.com/catalog/product_info.php/products_id/88146/Aimshot+MT61172+Quick+Release+Riser+Base+For+AR+AR-15+Style+

A: Hi Jonathan, Yes this is AR compatible. You'll need a .5" Riser to get optimal height for your AR Rifle. -: budsgunshop.com/catalog/product_info.php/products_id/88146/Aimshot+MT61172+Quick+Release+Riser+Base+For+AR+AR-15+Style+

A: Yes I use one on my M&P 15 you may need a riser depending on if you have other sights that you want to co witness with I do not have any other sights on mine and did not need the riser

A: This sight will work on any gun with a Weaver or Picatinny type base … riser or not.

A: Yes I use one on my M&P 15 you may need a riser depending on if you have other sights that you want to co witness with I do not have any other sights on mine and did not need the riser

A: William no, the PT111 G2 does not have a top rail for mounting this optic. You would need a Weaver or Picatinny Rail.

A: sorry it will not fit the PT111 G2 does not have a top rail for mounting this optic. You would need a Weaver or Picatinny Rail.

A: Hi William, Unfortunetely no since You would need a Weaver or Picatinny Rail. The PT111 G2 does not have a top rail for mounting this optic.

A: Donald, yes it will hold up just fine on a 357 Magnum.

A: Yes sir it should with no problem. They're used on 12 gauge shotguns, 308s ... so shouldn't be any problem at all. And TruGlo has a limited lifetime warranty, should you have problems.

A: It should no problem. But you might want to check the reviews on other web sites, it doesn't seem very reliable.

A: I have had great luck with mine and it will handle the .357 with no problems

A: Usually about 1.4-1.5 inches is the standard for co-witness.

A: Can you angle mount it?

A: Shawn, you will not a riser for absolute co-witness. The sight already contains the proper built in riser/mount for standard AR height Sights. https://www.youtube.com/watch?v=yHXCSKKH6TA

A: Shawn - with this red dot, and the MBUS sights, you'll not need any riser other than what comes with the red dot for an absolute co-witness. Just mount it on the rail as it is. The companies pretty much have their products all on the same sheet of music these days. Again - you DO NOT need a riser.

A: No it will not as there is no top rail to attach it to

A: Joseph, like the other answer said the SR9C has no top rail and even if you did have a mounting solution for it this sight would be quite comically large for a pistol that size, here's some perspective with a full size Glock: https://www.glockstore.com/assets/images/products/Truglo-Multi-Reticle-Dual-Color-Open-Red-Dot_main-3.jpg?resizeid=7&resizeh=275&resizew=275 If you did get slide milling a or dovetail adapter to mount a red dot you would be looking more for the form factor of a Burris Fastfire, Trijicon RMR, Leupold Deltapoint, Vortex Venom, Sig Romeo1, etc.

A: It does wok well on my ruger 22/45 (stationary rail) I think that even if you could mount it to a SR9c slide the weight may be enough to cause failure to chamber issues by slowing down the slide

A: Joseph, no Sir it will not. You would need a Weaver or Picatinny Style Rail to mount this and the Ruger SR9c just does not have this option.

A: Yes, this should fit on the rail above the receiver.

A: Yes it should fit on your gun. But I would check and see what style rail you have first.