TruGlo Tru-Tec Micro Sub-Compact 1x 23x17mm 3 MOA

A: TRU•TEC™ MICRO mounts to optic-ready pistols using a common mounting plate bolt pattern. The optic co-witnesses with suppressor-height or high-profile sights. Fits Glock® MOS™ and similar systems. Does not fit RMR specific slide cuts unless you use the RMR specific TRU-Tec Micro (TG8200B).

A: Hi Maurice, this has the Vortex/EOtech/Docter/Insight/Meopta Footprint Also comes with a picatinny mount. Stay safe & have a great day!

A: Hi Maurice and welcome. This model has a Common lug and bolt pattern for maximum compatibility with (Vortex®, EOtech®, Docter®, Insight®, Meopta®, etc.) You would need an RMR Plate to mount to a non RMR Cut pistol. Cheers and stay safe!

A: Hi Reuben and welcome. This will work if you have the MOS optics plate already. If not, you will need this one : https://www.budsgunshop.com/search.php/q/788130026076/search_in/description ---- Cheers and stay safe!

A: Hi Reuben, if you Glock is not optics ready, you will need this sight https://www.budsgunshop.com/product_info.php/products_id/135930/red-dot+mcro+tru-tec+glk+doc , It comes with the Glock rear sight dovetail mount adapter (not shown in picture) Stay safe & have a great day!

A: Hi Carmen and welcome. This model comes with a Picatinny mount. You would need a picatinny rail on your Mark 1 to mount or an (Vortex®, EOtech®, Docter®, Insight®, Meopta®, optics plate. Your Mark 1 may not have an optics cut slide for mounting this with the picatinny rail mount attached. Cheers and stay safe!

A: you will need a red dot dove tail adapter for the proper red dot these guys can help you https://www.mountsplus.com/ruger-mark-i-ii-iii-iv-red-dot-mounts.html

A: This will require a standard piccatinny rail to mount on you Ruger Mark 1.

A: Hi Gary and welcome. You will need Plate #1 : https://www.glockstore.com/Glock-MOS-Adapter-Set

A: Hi Jacob, it will fit if you have the optics ready model. The M&P 2.0 uses an adapter plate system. The slide is cut and ready to accept adapter plates that come with the pistol. Each adapter plate is made to fit a different optic. This will fit using plate #3 that came with your gun. Stay safe & have a great day!

A: Hi Jacob and welcome. Yes Sir. You will mount using Plate #3 (RMR footprint ). If you don't have the factory plate, this one will work just fine: https://www.amazon.com/PLT-M2-0-CORE-RMR-HOLO/dp/B09YYWFVZF ---------- Cheers, stay safe and enjoy!

A: Hi Anthony and welcome. Not directly as the Girscan Influencer 9mm 1911SC has an RMSc Optics Cut. Cheers and stay safe! https://www.budsgunshop.com/product_info.php/products_id/714030348/shlds+rmsc+poly+rfx+mini+sight+4moa