Rock Island Armory TAC Ultra FS 10mm Parkerized 1911 Pistol

A: Ambi according to the pictures. https://www.google.com/search?q=ria+10mm+1911&rlz=1C1EODB_enUS524US602&tbm=isch&source=iu&ictx=1&fir=WMgn6iITQpMeoM%253A%252Cfexhh9ixfMi5EM%252C_&usg=__9IrEvxr5bh0xl_7UF_XqeGs30y8%3D&sa=X&ved=0ahUKEwjAvcnOnd_ZAhXmqVQKHYVCCWgQ9QEIVzAF#imgrc=WMgn6iITQpMeoM:

A: I have this gun and it is a Ambi safety

A: Like I said before I have this gun it is a ambi safety it comes with 1 mag and a hard case. I sent mine back to RIA and had them fit a .40 S&W barrel so I can shoot both .40 and 10 mm in mine (if RIA does the work you still have the lifetime warranty)

A: Yes, this has an "Ambidextrous Safety" as pictured here : https://www.google.com/search?q=Rock+Island+51914+TAC+Ultra+FS+Single+10mm&source=lnms&tbm=isch&sa=X&ved=0ahUKEwi4wOnioN_ZAhUPNd8KHc24DMEQ_AUICygC&biw=1920&bih=938#imgrc=Ir7xwbV5Ukc1QM:

A: Hi Richard, Yes, this has an Ambidextrous Safety

A: Please click the green box stating it as the best answer. We are rated on our answers and are just volunteers, not Buds employees. You can choose more then one Thank you!

A: Hi Jeff, Yes it does SPECS - A1-style bushing and short guide rod have been replaced by a button-rifled barrel and full-length steel guide rod... so it can handle hot 10mm loads, no problem. Full dust cover rail evens the weight and reduces recoil-- >>>>>>>>Bull barrel and full-length guide rod are designed to handle the 10mm-- 4-6 lbs. trigger pull-- 1:16" twist, 6 grooves-- 2-dot tactical adjustable rear sight-- High-visibility front sight-- G10 grips for aggressive grip-- Ambidextrous safety-- Combat hammer-- Extended beavertail-- Skeletonize trigger -- Includes one 8-rd. magazine

A: I have one in 10 mm 40 S&W and 45 acp and the 10 mm and 40 S&W have a BULL barrel the 45acp has a conventional bushing setup

A: Jeff, this pistol has a fully supported bull barrel and full-length guide rod facilitate full-power loads.

A: John, it is not checkered but has lengthwise vertical lines as pictured here : https://www.google.com/search?q=Rock+Island+51914+TAC+Ultra+FS+Single+10mm&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiZu5PamYfeAhXjQd8KHa9KB78Q_AUIDygC&biw=1280&bih=618#imgrc=bMHFrmHbcUa48M:

A: Not checkered but a straight lined grip pattern

A: it is "lined" vertical lines for a better grip as pictured here : google.com/search?q=Rock+Island+51914+TAC+Ultra+FS+Single+10mm&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiZu5PamYfeAhXjQd8KHa9KB78Q_AUIDygC&biw=1280&bih=618#imgrc=bMHFrmHbcUa48M

A: Michael, Rock Island 1911's do not use firing pin block safeties, just the grip safety and manual thumb safety.

A: No Michael, this 1911 is a Series 70, does not have the firing pin safety. It has the beavertail grip safety, the thumb safety, and most importantly, the shooter's trigger finger - the most important safety of all!

A: I have one and it is a fully supported ramped barrel you can also send it back to RIA and have a 40 cal barrel added to make it a 40/10mm combo That is what I did with mine

A: Jesse - Comes with fully supported ramped barrel and full length guide rod, and backed by a full lifetime warranty.

A: Jesse, yes Sir. The ramped barrel is fully supported and ready for Underwood, Buffalo Bore, Doubletap and other "Full Power" 10mm loads.

A: I have one and it is a fully supported ramped barrel you can also send it back to RIA and have a 40 cal barrel added to make it a 40/10mm combo That is what I did with mine

A: Douglas, Craft Holsters are top tier. Make sure you select a Holster for the Railed 1911 : https://www.craftholsters.com/1911-w-rail-holsters?gclid=CjwKCAjw8cCGBhB6EiwAgORey6cdB2Tf89uafagu6ATrdwhrkoqwNK3P-H4-1-g-QxfZWovHojxyvBoCcXcQAvD_BwE

A: here you go again its a 5 inch barrel with rail https://www.desantisholster.com/thumb-break-scabbard/